charger specification ------ how to use charger to charge lead acid battery


Current 12-18A
When charging the current of the battery cannot be higher than 18A
Voltage of battery: 60V
Voltage input: 200V -240V
Current output: 0-18A
Charging time: 10h

USING METHOD
1. Charging should be start when the battery is no power.(Before charging, connect the charger with vehicle first then connect the charger with power socket)
2. Turning the witch button, make sure the charging current is 17A (15A in summer\ 17A in winter). Charging time should be around 10h.
3. The battery is full when the yellow button light up, keep on charging 2-3h then the battery can have its best function.
4. Turnning knob until the current that showing on the instrument is betwwen12A-18A
NOTIFICATIONS
1. Read this article carefully before charging.
2. The input source power wire of the charger should use 2.5 square meter copper. Using the output wire instead is forbidden.
3. When the safety wire is broken, a same model safety wire should be used. (Two extra safety wire were past on the back of the charger)
4. Current higher than 18A will cause damage to the charger and battery.
5. Charger should be used outside, no wind, dry, no flammable and combustible place.
6. The out case of the charger should be connecting to ground. (Incase of any dangerous such as leakage of electricity ) 
7. Put it away from pet, children and any other animals.










评论

发表评论

此博客中的热门博文

BREB announces solar-powered charging stations for easy-bikes

More than 450,000 electricity-powered easy-bikes operate across the country, consuming more than 420MW of electricity per day. To ease the burden on the national electricity grid, The Bangladesh Rural Electrification Board (BREB) are going to install solar-powered charging stations for easy-bikes and battery-operated rickshaws in four different locations. Within the next two months, four stations with 20-22 kilowatt capacity will be established in Mymensingh, Comilla, Gazipur and Narayanganj. Easy-bikes have a set of five batteries with a capacity of 60V, which consume 1kW of electricity daily and take 4-5 hours to be fully charged. More than 450,000 electricity-powered easy-bikes operate across the country, consuming more than 420MW of electricity per day. The charging stations are going to be placed through the Palli Bidyut Samities and is funded in part by the Sustainable and Renewable Energy Development Authority (SREDA). A deal was signed between BREB and SREDA on
阅读全文

Belagavi's e-rickshaw promises less pollution

图片
The e-rickshaw is attracting passengers with its looks and smooth sound.Many are hiring the vehicle out of curiosity, just for a spin around the city. BELAGAVI: The first eco-friendly electric auto rickshaw (e-rickshaw) made its debut in Belagavi city at a time when friction between the public and traditional auto drivers is raging over mandatory implementation of auto meters and charging fares according to meter reading. The e-rickshaw is attracting passengers with its looks and smooth sound. Many are hiring the vehicle out of curiosity, just for a spin around the city. Four people can sit comfortably in the vehicle which has a spacious seat. Vijay Vastrad, owner of the e-rickshaw, said the vehicle runs at a speed of 30-40km per hour. It can ply for nearly 80km after being charged for three hours, he said. The company behind the e-rickshaw is e-Motion. With the e-rickshaw attracting passengers, more people appear eager to buy environment-friendly vehicles which are noiseless a
阅读全文